ResinTech RSM-25 is a sodium form macroporous strong acid cation resin. Its high crosslinking results in very high selectivity for radium on a one-time use basis. It does not contain barium, is pH agnostic, and does not require a minimum sulfate concentration.

ResinTech RSM-25-HP is a sodium form macroporous strong acid cation resin. It is WQA Gold Seal Certified for use with potable water. Its high crosslinking results in very high selectivity for radium on a one-time use basis. It does not contain barium, is pH agnostic, and does not require a minimum sulfate concentration.

ResinTech RSM-50 is a sodium form macroporous highly crosslinked hybrid strong acid cation resin. Barium sulfate is monoatomically dispersed into the polymer resulting in a very long throughput capacity for radium on a one-time basis.

ResinTech RSM-50-HP is a sodium form macroporous highly crosslinked hybrid strong acid cation resin. It is WQA Gold Seal Certified for use in potable water applications. Barium sulfate is monoatomically dispersed into the polymer resulting in a very long throughput capacity for radium on a one-time basis.

ResinTech SIR-100 is a chloride form macroporous nitrate selective strong base anion resin. Its unique functionality increases the selectivity for nitrate and decreases selectivity for sulfate, often resulting in higher operating capacity and lower leakage than type 1 or type 2 anion resins.

Chloride form nitrate selective strong base anion resin. Gold Seal Certified by WQA for use in potable water. High selectivity for nitrate and decreased selectivity for sulfate, often resulting in higher operating capacity and lower leakage than type 1 or type 2 anion resins.

ResinTech SIR-1000 is a copper selective macroporous chelating weak base anion resin. Its unique functionality provides exceedingly high selectivity for copper as well as other transition metals in almost any aqueous solution, yet can be regenerated with acid and then neutralized with various alkaline salts prior to use.

ResinTech SIR-110 is a chloride form perchlorate, nitrate, and PFAS selective gel strong base anion resin. Its unique functionality greatly increases the selectivity for nitrate while greatly decreasing the interference from sulfate ions. SIR-110 is recommended for the removal of perchlorate, nitrate, and most PFAS compounds.

ResinTech SIR-110-HP is a buffered chloride form perchlorate, nitrate, and PFAS selective gel strong base anion resin. The HP designation means it is Gold Seal Certified by the WQA for use in potable water applications. The buffered chloride form mitigates the pH drop at startup. Its unique functionality greatly increases the selectivity for nitrate while greatly decreasing the interference from sulfate ions.

ResinTech SIR-110-MP is a chloride form nitrate and perchlorate selective macroporous strong base anion resin. Its unique functionality greatly increases the selectivity for nitrate while greatly decreasing the interference from sulfate ions.

Buffered Chloride form nitrate and perchlorate selective macroporous strong base anion resin. Increases selectivity for nitrate and reduces sulfate ion interference. Recommended for perchlorate, nitrate, and some PFAS removal. Gold Seal certified by WQA for drinking water applications. The buffered chloride form mitigates the pH drop at startup.

ResinTech SIR-1200 is a chloride form type 1 gel strong base anion resin. It has an exceptionally high capacity and is optimized for mining and single-use applications. SIR-1200 is intended for use in uranium removal as well as the removal of other trace contaminants such as chromate and arsenate in industrial applications.

ResinTech SIR-1300 is a chloride form hybrid gel strong base anion resin. It has crystalline manganese oxide mono-atomically dispersed throughout the polymer. The manganese oxide hybrid material stores oxygen atoms that combine with ferrous iron to form insoluble ferric oxide, which is trapped inside the resin bed. Oxygen is replenished by an air scour at the start of the cleaning cycle that also separates the suspended solids from the resin beads. Accumulated iron particles are then removed by backwash. SIR-1300 is intended for removal of ferrous iron from potable water.

ResinTech SIR-150 is a borate selective macroporous chelating weak base anion resin. Its unique functionality provides exceedingly high selectivity for boron in almost any aqueous solution, yet can be regenerated with acid and then neutralized with various alkaline salts prior to reuse.

ResinTech SIR-150-HP is a borate selective macroporous chelating weak base anion resin. Its unique functionality provides exceedingly high selectivity for boron in almost any aqueous solution, yet can be regenerated with acid and then neutralized with various alkaline salts prior to use.

ResinTech SIR-200 is a mercury selective hydrogen form macroporous weakly acidic cation resin. Its unique functionality makes it selective for mercury and other heavy metals as well as for noble metals when present as cations. SIR-200 is intended for mercury removal and the removal/recovery of various precious metals.